"Experience life as it should be!"

Within minutes and with very little effort, open your enclosure system and enjoy all the excitement of an outdoor pool! Close it against bad weather, and you are protected from the cold, rain, or wind. This unique approach to enclosing an area is not just a matter of aesthetics or style, but also comes with site-specific engineering to ensure compliance with local building codes. On the one hand, you will get a state-of-the-art system with an incomparable look, while also being ensured durability, ease of operation, functionality, safety and security.

Whether it be a freestanding or lean-to model, there are no limits to the possibilities. Just imagine!

Glazed with light, twin-wall polycarbonate (200 times stronger than glass), the unit captures solar energy even on cloudy days, and filters 99% of the sun’s harmful UV radiation. Any normal condensation inside the enclosure is diverted through an anti-drip channel system which voids at the base of the structure. The unit sits on wheels and Libart’s exclusive SecurTrak ™ system to allow low friction and smooth operation.

You can decide not to heat the enclosure, depending on what the intended usage is. If you do want to use it 12 months out of the year, all you need to do is keep a solar blanket over the heated pool, and possibly add a small gas heater inside to raise air temperature which holds the condensation and clears the fog.

This beautiful system typically costs less than 50% of conventional indoor pool buildings, is extremely easy to care for, keeps debris and leaves out of your pool, and reduces the amount of chemicals required. The installation is quick and with minimal disruption. It can even be relocated with your family. The possibilities are endless.

Click here to view product specs.

To view the product specs, you must have Adobe Reader. Click on the icon to download.

FREESTANDING MODELS
This a self-supporting structure which can have two gable ends or only one with the other end attached to a structure. Typically, this unit can sit on a concrete slab, supported by various methods depending on local building codes.

We offer these following systems:

• E - Four Segments per bay
• D - Six Segments per bay
• V - Eight Segments per bay

RETRACTION TYPES:

• R1 - Largest bays on the ends, middle bays retract under end bays.
• R2 - Smallest bays on the ends, middle bays retract over end bays.
• R3 - All bays retract towards end of enclosure.

Height can be adjusted in increments of 6 inches. Size of open area once the unit is retracted can also be custom designed, by adding length to the tracks.



LEAN-TO MODELS
Has all the features of a freestanding unit, but basically is half the design with walls bearing at grade and roof sections bearing against a fixed wall.

Again, the three basic models are:

• E-L - Two segments per bay
• D-L - Three segments per bay
• V-L - Four Segments per bay

MODELS



This structure can cover a deck or a patio and the basic requirements for the deck foundation will vary somewhat depending on local building codes.



INDUSTRIAL APPLICATIONS
"Don't be left behind the times..."

This state of the art technology has been scooped up by the industrial world. In one instance, a very forward thinking employee suggested this structure be installed inside a plant where assembly and repair of very large, high-tech engines required a dust-free, climate controlled environment. They had been looking for a long time for a solution to this problem, and had tried various traditional structures, which were cumbersome inefficient, before they adopted the Libart system. By installing some commercial heat/cool units inside the enclosure, they were easily able to create a negative pressure environment and consequently achieve a dust-free area. Since opening and closing the units is very easy and quick, minimum down-time is experienced when one line of work is finished and another one must start. The possibilities for this system are endless. Let us help you design something for your specific needs.